shop

one. Cleanse the shaft, the internal and outer holes of the bushing, and the interior gap of the hub. Get rid of any oil, paint or filth, location the bushing on the hub, and match the 50 percent holes to make complete holes (each complete hole will only be threaded on one particular facet). Evenly oil the threads and points of set screws or the threads and heads of cap screws. Loosely location the screws in the threaded holes on the hub facet. Make sure the bushing is totally free on the hub. Snap the assembly onto the shaft and place it in the preferred placement. Tighten the screws alternately and evenly till all are restricted 5. Hammer the large finish of the bushing with a hammer and block or socket to avoid hurt. The screw can now be turned somewhat to the specified torque location. Repeat this alternating hammering and screw retightening until the specified torque is arrived at. Fill all holes with grease to remove grime.
shop

Tags: