Merchandise Description
CZPT CZPT API 13 3/8″ BTC Float Collar N-80 fifty four.4LBP
1) Kinds Offered: Single valve and double valve are CZPT
Spring structure valve and ball strucuture valve are CZPT
Insert type and normal variety are CZPT .
Non-rotating type and normal sort are CZPT .
2) API and ISO licensed
three) Specifications: 4”—20”. Far more special sizes or combination are CZPT as requested.
four) API Casing Grades: J55, K55, N80, P110, L80, etc.
5) Connections Type: LTC, STC, BTC
Application
Float tools serves as the spine of casing products used during main cementing operations. It guides the casing to whole depth and helps prevent contaminated mud from entering the casing. Also it supplies a landing position for casing wiper plugs, reinforces the decrease finish of the casing string, and guarantees higher precision of cement slurry displacement.
Float collar and shoe Characteristics:
one) All interior elements are created of very easily drillable aluminum alloy
2) The unit can be linked right to identical sort casing
three) CZPT ble again-strain leak proof structure, allow grout or slurry circulation with less resistance
four) Valve seat and valve disk can efficiently avert grout from flowing again
5) Hardness of foundation substance is equal to API Spec N-80
6) API spec. Q1 and ISO9000 certification
Specification | In-Dia | Out-Dia | Peak | Ahead force | Backward pressure |
Link screw thread | Material | Normal |
FG-FZQ140 | 154 | 122 | four hundred | 20MPa | 25MPa | 5-1/2″LCSG | 40Cr | SY/T5618-2000 |
FG-FZQ178 | 194 | 159 | 400 | 20MPa | 25MPa | seven”LCSG | 40Cr | SY/T5618-2000 |
FG-FZQ245 | 270 | 220 | 450 | 20MPa | 25MPa | 9-5/8″LCSG | 40Cr | SY/T5618-2000 |
FG-FZQ340 | 365 | 313 | 450 | 10MPa | 10MPa | thirteen-3/8″LCSG | 40Cr | SY/T5618-2000 |
Forex-FZQ140 | 154 | 122 | five hundred | – | 25MPa | five-1/2″LCSG | 40Cr | SY/T5618-2000 |
Forex-FZQ178 | 194 | 159 | 500 | – | 25MPa | 7″LCSG | 40Cr | SY/T5618-2000 |
Forex-FZQ245 | 270 | 220 | 550 | – | 25MPa | nine-5/8″LCSG | 40Cr | SY/T5618-2000 |
Forex-FZQ340 | 365 | 313 | 550 | – | 10MPa | 13-3/8″LCSG | 40Cr | SY/T5618-2000 |
Install 1.1. Clear all oil, grime and paint from shafts, bushing holes, bushing exterior and holes of components (sprockets, pulleys, etc.). Insert the bushing into the assembly. 3. Match the pattern of holes, not threaded holes (every single gap is threaded on one particular aspect only). Insert the socket head cap screws or screws into the 50 %-threaded holes demonstrated in the graphic below. Set up the assembly on the shaft. 4. Transform the torque placing or cover screw* to the advisable torque placing in the diagram below. Fill any unfilled holes with grease.